SBL-1060SEFT
|
Maximum Paper Size |
: |
1060 x 760 mm |
|
Minimum Paper Size |
: |
400 x 350 mm |
|
Maximum Cutting Size |
: |
1050 x 745 mm |
|
Maximum Cutting Pressure |
: |
300 Tons |
|
Paper Thickness (Stock Range) |
: |
0.1 - 2 mm |
|
Register Tolerance |
: |
+/- 0.2mm |
|
Minimum Gripper Margin |
: |
9.5 mm |
|
Inner Chase Size |
: |
1155 x 852 mm |
|
Face Plate Size |
: |
1075 x 769 mm |
|
Maximum Cutting Speed |
: |
8,000 cycles per hour |
|
Maximum Cutting Speed |
: |
8,000 cycles per hour |
|
Variable Speed Main Motor |
: |
21.75.0 Kw |
|
Bottom heater (3 Zones) |
: |
9 KW |
|
Main Machine Power Required |
: |
220 V, 60 Hz, 3-Phase, 110A |
|
Machine Dimensions (L x W x H) |
: |
5884 x 4193 x 2515 mm |
|
Total Weight (approx.) |
: |
20 Tons |
|
|
: |
|
-
Brand new version of Foil Control System with full color Touch Screen panel
-
New layout and new structure for the Foil Treading route for more stable and Higher speed when run a job
-
5 – Foil pull rolls with individual programmable for foil pull length
-
6 Shaft Foil Re-winder to ensure the foil rewind properly, even with narrow foil
-
20 Zones heater base with individual temperature control on the touch-screen
-
Dual air blaster for sheet smoother and separation
-
Large Cat-Walk for easy access during make-ready
-
Up-to-date sheet inspection table with over head light
-
High raise machine, for higher pile on feeder and delivery
-
Improved feeder for handle paper
-
Standard equipped with head-stop and side guide sensor
-
300 metric tones of pressure for die cutting and foil stamping
-
Honey-comb base for easy locking stamping/embossing dies
-
Easy Foil loading system
-
Elevation 300mm
-
This machine with stripping device.
Complete with: one (1) Honeycomb Die-chase and Temperature Controls Console 5-Draw Foil Puller and with 6 shaft re-winder
|
Foil Longitudinal Puller Shafts |
: |
3 |
|
Foil Transverse Puller Shafts |
: |
2 |
|
Maximum Foil Diameter |
: |
≧Ø200 mm roll |
|
Maximum Longitudinal Rewind Diameter |
: |
Ø 400 mm roll |
|
Maximum Transverse Rewind Diameter |
: |
Ø200 mm roll |
|
Maximum Foil Stamping Area |
: |
740 mm x 1040 mm |
|
Heating Zones |
: |
20 Zones |
|
Temperature Control Range |
: |
0 - 180 ºC |
|
Foil Unit Power Required |
: |
220V, 60 Hz, 3-Phase, 100A |
|
Heater Power |
: |
30 Kw |
|
Honeycomb |
: |
1 pc |
Interested in this press?
SBL Guarantee
Each new machine supplied and installed by SBL UK is supplied with a comprehensive parts and labour guarantee, all of which is carried out by our own skilled and experienced technicians.
